Hidden Pocket Closet Hanger

Make this padded hanger to help keep clothing from slipping off the hanger. The zipper opening at the bottom conceals jewelry or valuables.

 

Supplies

 

Make the Pattern

Make a pattern for the cover by tracing around a sturdy clothes hanger.

Add 5/8 inches on all sides. (This will be for 1/2 inch seam allowance and ease.)

Trace the pattern onto the 10” x 20” rectangle of fabric, but DO NOT cut out.

Mark the horizontal and vertical centers of the cover front for the embroidery. (When placing embroidery on an item that is smaller than the hoop size, it is easier to trace a line around the pattern on the fabric, then embroider the fabric and cut out after the embroidery is completed.)

 

Embroider the Design

Adhere two layers of OESD Cut Away Stabilizer together with Temporary Spray Adhesive.

Spray the top of the stabilizer and adhere to the wrong side of the 20” X 10” fabric for embroidery.

Hoop the three layers as one and attach the hoop to the machine.

Select and embroider the design.

Remove the hoop from the machine and the fabric from the hoop.

Carefully tear away the stabilizer from the back.

 

Construct the Hanger Cover

Place the front fabric with wrong side down on top of the batting rectangle and baste or zig zag around the entire hanger shape. This allows the layers to be treated as one and overcasts the edges at the same time. Repeat with the back fabric.

Place the pattern piece onto each section and cut out the shape of the hanger.

With right sides together, baste the lower edges together.

Stitch the zipper in place at the lower edge and remove the basting stitches.

Fold the top curved edge to the wrong side and stitch along the fold.

Unzip the zipper a short distance, place right sides together and stitch along the two sides leaving the neck opening unstitched.

Turn right side out at the zipper opening.

Insert the hanger inside the cover.

If you have any questions about this hanger project, please contact us at support@oesd.com.

This material is © OESD, LLC and may not be reproduced or published without permission.