Plant Stake Banner





Cut (1) background block 8" x 14"
Cut (1) background strip 3" x 14"
Cut (1) backing piece 7" x 12"
Cut (1) fusible batting 11" x 14"
Cut (4) 2" x 2" hang tab

Banner Top

To make hang tabs, place wrong sides together and sew 1/4" on both sides. Turn tabs to right sides and press. Fold each tab in half and press.

Sew the side background strip to the background block.

Bring designs 80020-06, 80020-15, 80020-15, 80020-18, and 80020-19 into your sewing machine or software and arrange.

Follow Applique Fuse and Fix instructions and fuse to banner block. Hoop banner block and Applique Fuse and Fix. Follow appliqué backing instructions when embroidering appliqué designs. Embroider designs.

Remove from hoop and cut banner block to measure 7-1/2" x 12-1/2". The strip piece is 2" x 12-1/2". Background block is 5-1/2" x 12-1/2".

Pin the folded hang tabs in 1" from each top corner and even with top banner edge. The folded edge will be facing towards embroidery designs. Place the banner back on top of the banner block, with right sides together. Fusible fleece will be the bottom layer. Sew 1/4" around the banner. Do not leave an opening. Clip corners.

On the backing piece, draw a line about a 1" from the bottom and about 4" long from side to side.

Cut the backing fabric only, on the drawn line. Turn banner to right sides. Press. Hand stitch opening closed. If you desire, you can fuse a piece of ribbon cut just a little longer than hand stitching, over the hand stitching.

Place Hip Hop Garden banner onto pot stake. Place banner and stake in a favorite pot. Enjoy!

This material is © OESD, LLC and may not be reproduced or published without permission.